Marca: Yamaha

Tienda: Sevilla Musical

Disponibilidad: En almacén, envío inmediato.

Especificaciones Size/Weight Dimensions Width 515mm Height 146mm Depth 561mm Weight Weight 14kg General Specifications AD Converter 24 bit linear, Enhanced dual-bit delta-sigma conversion CH EQ 3 band PEQ ±18 dB, MID frequency range: 100 Hz-10 kHz High Pass Filter OFF/80 Hz (-12 dB/oct.) Sampling Frequency Rate Internal (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz) External (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz (±0.1 %)) Frequency Response fs = 48 kHz (20 Hz-20 kHz, +1, -3 dB @ +4 dB, into 600 ohms) fs = 96 kHz (20 Hz-40 kHz, +1, -3 dB @ +4 dB, into 600 ohms) CH IN to STEREO OUT Total Harmonic Distortion 0.003 % or less (1 kHz @ +18 dB, into 600 ohms) GAIN: Minimum Cross Talk -86 dB, CH1-8 -80 dB, CH9-12 GAIN: Minimum Adjacent Input Storage and Connectivity Storage Floppy Disk Drive No CD-RW No Internal Memory No Hard Disk Drive No External Drives No Optional Memory No SmartMedia Slot No Expandability Plug-in Boards No Connectivity DC IN DC IN Headphones PHONES(TRS phone type, unbalanced) Foot Switch FOOT SW Microphone INPUT A 1 - 8(XLR type balanced) MIDI MIDI IN/OUT DIGITAL IN No AUX OUT AUX OUT(TRS phone type, balanced) DIGITAL OUT No OPTICAL OUT No PHONE OUT No TO HOST No USB No USB TO DEVICE No USB TO HOST No Others INPUT B 1 - 8(TRS phone type, balanced),INSERT I/O 1 - 8(TRS phone type, unbalanced),INPUT9 - 12(Phone type, unbalanced/RCA pin type, unbalanced),2TR IN(RCA pin type, unbalanced),ST OUT(TRS phone type, balanced/RCA pin type, unbalanced),CR OUT(TRS phone type, balanced),DAW I/O Power Supply Power Consumption 51W Phantom Power +48 V DC (Only for INPUT A, turn on/off every 4 channels) System Requirements Windows CPU Intel Core or Pentium or Celeron family processor, 1.4 GHz or better with an S400 (400Mbps) IEEE1394 (FireWire) or i.Link terminal. Support OS XP Professional/XP Home Edition SP2 Memory 512 MB or more Macintosh CPU Power Mac G4 1 GHz or Core Solo 1.5 GHz or better with an S400 (400Mbps) FireWire. Support OS Mac OS X 10.4 or higher Memory 512 MB or more Bundled Software CD-ROM CD-ROM (TOOLS for n) Accessories Included Accessories Power Adaptor AC power adaptor(PA-30) Cable IEEE1394 cable Others DVD-ROM (CUBASE AI4),Owner's Manual,TOOLS for n/CUBASE AI4 Installation Guide System Requirements Windows Others *** The computer must have an IEEE 1394 (FireWire or i.LINK, etc.) connector for IEEE1394 connection. If there is no connector, please install an IEEE1394 interfacecard (PCI or PC). When using a laptop or notebook computer, a built-in IEEE1394 terminal may not be available. In this case, install an appropriate PC interface card. 1394 Chip Set Compatible with n12/n8 IEEE1394 connection with "TOOLS for n" - AGERE FW323-05 - AGERE FW323-06 - TI TSB12LV23 + PHY - TI TSB12LV26 + TSB41AB03 - TI TSB43AB22/A - TI TSB43AB23 - VIA VT6306 *ATTENTION The manufacturer may alter the above mentioned Chip Set without notice. Depending on the change, there's a possibility of it not working properly with this driver. 1394 Chip Set NOT Compatible with n12/n8 IEEE1394 connection with "TOOLS for n" - NEC D72873GC - NEC D72874GC - NEC uPD72874