Marca: Kingston

Tienda: Agrupa.es

Disponibilidad: En almacén, envío inmediato.

KVR1066D3S7/4G 4GB 512M x 64-Bit PC3-8500 CL7 204-Pin SODIMM DESCRIPTION: This document describes ValueRAM's 512M x 64-bit 4GB (4096MB) DDR3-1066 CL7 SDRAM (Synchronous DRAM) memory module, based on sixteen 256M x 8-bit DDR3-1066 FBGA components. The SPD is programmed to JEDEC standard latency 1066Mhz timing of 7-7-7 at 1.5V. This 204-pin SODIMM uses gold contact fingers and requires +1.5V. The electrical and mechanical specifications are as follows: FEATURES: JEDEC standard 1.5V ± 0.075V Power Supply VDDQ = 1.5V ± 0.075V 533MHz fCK for 1066Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 6,7,8,9 Posted CAS Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 6(DDR3-1066) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C Asynchronous Reset PCB : Height 1.180" (30.00mm), double sided component PERFORMANCE: CL(IDD) 7 cycles Row Cycle Time (tRCmin) 50.63ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 160ns Row Active Time (tRASmin) 37.5ns (min.) Power 1.320 W (operating) UL Rating 94 V - 0 Normal Operating Temperature 0o C to 85o C Storage Temperature -55o C to +100o C