Marca: IIET

Tienda: IIET

Disponibilidad: En almacén, envío inmediato.

Arduino stepper motor driver Board modules/28BYJ-48 ULN2003 Connection method: IN1----P00 IN2----P01 IN3----P02 IN4----P03 VCC 5V power supply cathode GND power negative VM stepper motor power connector (use 5V when stepping motors, VM and VCC using a jumper Cap short; when using the 12V step motor, VM 12V power supply positive terminal) Can be changed to other wiring, modify the ports defined in the program always Main technical parameter: Rated voltage: DC5V Phase number: 4 Reduction ratio: one-sixty fourth Torque-angle: 5.625 °/64 DC resistance: 200 ω ± 7% (25 ° c) Insulation resistance: >10M ω (500V) Dielectric strength: 600VAC/1mA/1s Insulation grade: a No-load pull-in frequency: >600Hz No load pulling out frequency: >1000Hz Pull-in torque: >34.3mN.m Torque: >34.3mN.m Temperature: <40K (120Hz) Noise: <40dB (120Hz,No load,10cm) Weight: about 40g