Marca: D-Link

Tienda: CiudadWireless

Disponibilidad: En almacén, envío inmediato.

Centrally manageable via D-Link's DWC-1000 Wireless Controller Concurrent dualband: works in 2.4 and 5 GHz simultaneously Standalone mode for small deployments 802.11n connectivity for increased network capacity Up to 300 Mbps wireless speeds 1 Gigabit Ethernet port with PoE for convenient installation AP Clustering function for deployments that don't require a centralised controller Integrated RFID recognition for Aeroscout™ devices to track wireless clients AirMagnet™ support for WLAN planning, surveying and troubleshooting VLAN support WMM™ (Wireless Multi Media) to prioritise audio, video and voice applications Enhanced security with RADIUS support Load Balancing function to optimise high network traffic volume and redundancy The DWL-6600AP Wireless N Dualband Unified Access Point is a best-in-class indoor AP designed specifically for business environments. With high data transmission speeds and a load balancing feature, the DWL-6600AP offers high-quality and reliable wireless service. Versatile and powerful, the DWL-6600AP can be flexibly deployed as a standalone wireless Access Point or as a managed Access Point controlled by a D-Link's DWC 1000 Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later. Enhanced Performance The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia™ (WMM) Quality of Service features makes the DWL-6600AP an ideal Access Point for audio, video, and voice applications. In addition, the load balancing feature ensures maximum performance and best service quality in the wireless environment. Self-Configuring Cluster For small businesses that need to deploy multiple Access Points but lack the resources to tackle the complicated task of network management, the DWL-6600AP's self-configuring cluster feature offers the ideal solution. When a small number of DWL-6600APs is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator is through with configuring one Access Point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster. Unified Management Alternatively, the DWL-6600AP can operate in conjunction with D-Link's DWC-1000 Wireless Controller. In this mode, multiple DWL-6600APs can connect directly or indirectly to one of these switches/controllers to provide unparalleled security and wireless mobility for wireless clients. Each DWL-6600AP will be continually tuned by these switches to provide the optimal RF channels and transmission power for all mobile clients, giving them the best wireless signals in both 2.4 GHz and 5.0 GHz bands and uninterrupted wireless connectivity. Security The DWL-6600AP supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, and 802.1X. In addition, the DWL-6600AP supports up to 16 virtual Access Points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio and VAP. Rogue APs in the network may be easily detected, and the administrator will be immediately notified of any security threat. When used together with D-Link's Wireless Controller, the security can be raised to a new level. Convenient Installation With an embedded antenna and simple styled exterior, the DWL-6600AP can be installed on a wall or ceiling and blends in with most interior decorations in an office. Enclosed in a plenum-rated chassis, the DWL-6600AP adheres to strict fire codes for placement in air passageways. For easy installation, the DWL-6600AP has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available. 3rd party support The DWL-3600AP supports AirMagnet™, one of the industry's most accurate software solutions for planning, designing and troubleshooting wireless networks for optimal performance, security and compliance. AirMagnet™ calculates the ideal quantity, placement and configuration of APs for a successful WLAN deployment. It also allows IT administrators to test and diagnose wireless performance issues. Additionally, a RFID-based location tracking system is supported with Aeroscout™ technology. Aeroscout™ allows tracking of persons, objects and assets by means of RFID tags which have built-in location capabilities. This is especially useful within healthcare, manufacturing and security sectors. Standards IEEE 802.11n IEEE 802.11g IEEE 802.11a IEEE 802.3ab IEEE 802.3u IEEE 802.3 IEEE 802.3af Interfaces 1x Gigabit Ethernet (RJ-45) port (PoE-enabled) 1x Console (RJ-45) port 4x external antenna (Reverse SMA) connectors Management Telnet - Secure (SSH) Telnet Web Browser Interface HTTP - Secure HTTP (HTTPS) SNMP Support AP Clustering Security WPA™ - Personal WPA2™ - Enterprise (802.11i) WPA™ - Personal WPA2™ - Enterprise (802.11i) 64/128-bit WEP SSID Broadcast Disable MAC Address Access Control Rogue AP Detection Station isolation VLAN 802.1q VLAN support (max. 64 dynamic VLANs) SSID Support Multiple (up to 16 SSID per radio, 32 in total) Quality of Service (QoS) WMM Wireless Priority SpectraLink Voice Priority (SVP) Wireless Frequency Range 802.11n: 2.4 ~ 2.497 GHz / 4.9 ~ 5.85 GHz 802.11b/g: 2.4 ~ 2.4835 GHz 802.11a: 5.15 ~ 5.35 GHz / 5.725 ~ 5.825 GHz Operating modes Access Point (AP) Wireless Distribution System (WDS) 3rd party support Integrated RFID recognition for Aeroscout devices to track wireless clients AirMagnet support Antenna Internal Omni directional antennae (2x2 MIMO) 4x external antenna (Reverse SMA) connectors LEDs Power LAN 2.4 GHz 5 GHz Maximum Power Consumption 9.6 Watts Power Supply 12 V/1 A Physical Plenum-rated chassis Weight: 500 g. Dimensions (H x ø): 77.5 x 156 mm Temperature Operating: 0 to 40 °C Storage: -20 to 65 °C Humidity Operating: 10% to 90% (Non-condensing) Storage: 5% to 95% (Non-condensing) Certifications FCC Class B CE Class B C-Tick