Marca: Dualsky

Tienda: Fruugo España

Disponibilidad: En almacén, envío inmediato.

Specifications Lithium battery 2~6 series Discharge current max. 500mA Over-charging auto cut-off Power consumption approx. 700uA (at 'Sleep mode') approx. 200uA Weight 50g Dimensions 110x60x13 mm User manual (2,4 Mb) - Perfect for balancing the Lithium battery(Li-Po, Li-Io, Li-Fe) with maximum accuracy It monitors the voltages of each cell during the charge process to equalize the peak voltage. We guarantee the final voltages are normalized with an accuracy ofless than 0.01V. PB-6 can be used with any brands of charger but you had better use it being linked with e-STATION chargers. - High circuit power that enables fast-balancing PB-6 adopts bigger capacity of circuit to perform balancing rapidly. It can drain the current from each cell up to 500mA at a time. It is very essential for balancing larger capacity batteries. That high performance causes the internal heat. Therefore PB-6 has a aluminium outer case that is easy to emit the internal heat - Capable of self-balancing without a charger PB-6 can be self-operative without linking to charger. When you connect the battery pack to the individual port of PB-6 the balancing job will be started instantly. In this case the individual cell voltages will be equalized to the least cell voltage of the battery pack. - Maximum safety If the voltage of any one of the cells raises higher than 4.3V by any reason the circuit-breaker operates automatically. - Dual link for more than 6S battery pack PB6 can balance up to 12S Lithium battery pack when two units are linked together. Accessories EAC111 PB5/PB6 charger link cable Optional EAC123 Connection cable set for PolyQuest type Optional EAC124 Connection cable set for Align/Dualsky type Optional EAC128 Connection boardfor Kokam/Graupner/Robbe-type Optional EAC129 Connection boardfor ThunderPower/Multiplex-type Optional EAC130 Expansion link cable(4P) for dual link Optiona